English
Français 
Custom reinforcement cages fabricated from your BBS or structural drawings. Cage sections can be planned for transport, labeled by project sequence and packed for export.
For contractors, piling specialists, EPCs and importers handling 25T+ project orders.
Prefabricated rebar cages are reinforcement assemblies manufactured from structural drawings, BBS or bar mark information for piles, columns, foundations and other reinforced concrete works.
Yoshine can fabricate complete cages or transportable cage sections, with project labeling and export packing prepared for site sequence.
For contractors, piling specialists, EPC companies and importers handling project orders of approximately 25 tonnes or more.
Yoshine supplies prefabricated reinforcement cages for a range of reinforced concrete applications, including:
◢ Bored piles and drilled foundations
◢ Pile caps and deep foundation works
◢ Bridge piers and columns
◢ Building columns and structural cores
◢ Foundations and footings
◢ Custom reinforcement assemblies manufactured to project drawings
| Item | Available / Requirement |
Cage Type | Pile / Bored Pile / Column / Foundation / Custom |
Main Bar Diameter | According to approved drawing or BBS |
Tie / Spiral Diameter | According to project specificatio |
Cage Diameter / Width | Custom |
Cage Length | Custom / Transport-optimized sections |
Tie / Spiral Pitch | According to drawing |
Steel Grade | According to approved project requirement |
Cage Shape | Circular / Rectangular / Square / Custom |
Splice Arrangement | According to approved project detail |
Identification | Cage mark / Bar mark / Zone / Sequence |
Packing | Export / Container-ready packing |
| Minimum Export Order | Approx. 25 tons |
Send your structural drawings, reinforcement drawings or BBS. Our team reviews cage dimensions, bar diameters, spacing, splice details and fabrication sequence before production.
Main bars and transverse reinforcement are cut and bent to the approved schedule. Cage components are then organized according to cage mark, project section and installation sequence.
Where full cage dimensions are unsuitable for container transport, cages can be planned in transportable sections according to approved connection and site assembly requirements.
Each reinforcement cage or cage section can be labeled according to cage mark, project zone, level, pile number or installation sequence.
Bar mark identification and packing lists help site teams match delivered reinforcement with the approved drawings and reduce unnecessary sorting after arrival.
Export packing is planned around long-distance sea transport, container dimensions, unloading requirements and project installation sequence.
Rebar cages are manufactured from approved BBS, reinforcement drawings, cage schedules or bar mark information rather than fixed retail sizes.
Circular, rectangular, square and project-specific cages can be produced. Large cages can be divided into transportable sections where required for container loading and site assembly.
Finished cage sections can be identified by bar mark, cage number, pile number, project zone or installation sequence.
Send your cage drawings or BBS for fabrication review and quotation
Custom-fabricated reinforcement assemblies delivered site-ready from your structural drawings.
Used to confine the longitudinal bars in concrete beams, columns, and shear walls
High Strength. High Standard. Built for the Toughest Structures.
Precision Threaded Rebar for Mechanical Coupling
Provide mechanical anchorage and connection between structural components
Used in concrete slabs, walls, pavements, tunnels, and bridges
Used for fabricating stirrups, wire mesh, binding wires, and other light reinforcement applications
Reinforcement cage production is controlled against the approved project documents before fabrication begins. Material grade, bar diameters, cage dimensions, spacing, splice details and bar marks are confirmed against the fabrication schedule.
Production batches can be identified and documented according to project requirements. Material certificates and inspection records can be provided where applicable to the specific order.
Available mill certificates and material identification can be supplied according to the agreed steel grade and order requirements.
Cage diameter or width, tie or spiral pitch, section length and relevant connection dimensions are checked against approved fabrication information.
Cage marks, quantities, packing configuration and shipment identification are checked before loading.
Specific standard compliance is confirmed according to the required material grade, project specification and available certification.
Yoshine combines reinforcement detailing support with fabrication in China. BBS and project drawings can be reviewed before cutting and bending, helping align fabricated reinforcement with project requirements.
Cutting, bending, cage preparation, project identification and export packing can be completed before shipment to reduce secondary processing after arrival. Bar marks, cage numbers and project section labels help contractors distribute reinforcement to the correct work area after arrival.
Cage sections and packing can be planned around container dimensions and unloading sequence so large reinforcement assemblies remain practical for international transport.
Rebar cages can be supplied together with stirrups, cut and bent rebar, reinforcing mesh and related reinforcement components for the same project.
Yoshine Metal is a China-based supplier of prefabricated reinforcement for international construction and infrastructure projects.
Jinshi Museum, No.8 Qinling Rd, Qingdao China
Copyright © 2025 Qingdao Yoshine Metal Co., Ltd. All Rights Reserved.
Powered by HiCheng
